Mixer Cozy

My kitchen aid lives on the counter (as you may have seen in my second post) and with all the day-to-day cooking going on around it, the mixer often gets dirty between uses forcing me to clean it before every use.  I had the afternoon off and I came up with this awesome cover.

final

A few weeks ago when I was making a pair of short for my hubby’s Muddy Buddy team I found this awesome cupcake fabric on sale so I bought it for the stash knowing it would come in handy soon enough.  I also had left over quilt batting from a baby quit i made a few months back.  Looking up at my awesome filed fabric stash I saw the two and knew exactly what I wanted to do!

What you need:

measurementsCut the three pieces each out of your cover fabric, your lining fabric and your batting. My fabric has a clear direction so I made sure to cut all pieces keeping the cupcakes going top to bottom.

I wanted a little detail on the bottom of mine so I cut my long cover piece at 30×15 instead and then cut two 3.5×15″ yellow pieces and sewed them to the bottom before staring.

Next, you need to add the curve to the tops of your side pieces. I used a turned over 8″ bowl to get matching curves.

round

 

After your pieces are all cut, it is time to quilt them. Layer them so that the lining is wrong side up, then put the batting down and then layer the top fabric right side up – pin together and quilt.  I went with straight lines, but feel free to get creative here.

Once all of your pieces are quilted, pin the sides to the main piece rights sides together around the curve. I like to start in the center and work down to the ends. This way if your cutting was off you will be equally short on both sides and can fix the length at the end. Next sew the side in using a 1/2″ seam allowance. Repeat on the other side.

Next, take your ribbon and hand sew it to the center top in a loop. I used a 1/2″ ribbon, but you could create a loop from extra fabric, or larger ribbon or even leave it out if you don’t want one.

ribbonOnce your pieces are all together, if the bottom is uneven, cut the fabric so that it is straight all the way around.

Then press the bottom in a half inch deep, roll over so the raw edges are hidden, and press again.  Then sew around the bottom to finish.  Another option here is to cut an inch off the bottom and use bias tape to finish.

photo

Other variations could be to add piping around the sides, or add pockets – make it your own and have fun!

 

 

 

 

Advertisements

Getting Organized – Filing Your Fabric

Fabric stash disarray is an epidemic. Every seamstress I know has piles of folded fabric that inevitably fall over, yardage they lose of forget about and random bags, boxes and drawers of notions and pieces they have to dig through every time they start a project.

 With all of the sewing I have been doing lately, I was going crazy! Folding all of my fabric into bags, forgetting what I have and digging through like a dog looking for a bone every step of the way and ending up at the fabric store when I can’t find what I know I already have some where.

I started my solution search on Pinterest, as one does, and came across this.

The problem for me was that I don’t have extra closet or floor space in my 650 square foot flat for a filing cabinet, but what I do have are nine foot ceilings and shelves. I also wanted something clear so that I could easily see what I had stored, especially if it was going to live nine feet high – I want to know what I’m grabbing without opening every drawer.  So, I went to my local office supply store and picked up several clear vertical filing boxes, 100% recycled file folders (why not? They are the same price), an accordion folder and a stiff file folder with pockets.

SuppliesMy original intent was to use the accordion folder for my patterns, but I found that the hanging folders worked better for that.  I ended up using it to sort my notions, mostly ribbing, bias tape and elastic and I used the zip envelope for zippers and closures. I kept my sewing box to takes care of all my pins, scissors, needles, thread etc.  

I think deciding how to file your patterns and notions is going to be very personal depending on how big your collection and if most patters are for you or children or whomever.  Some ideas are to file by sex, or size or garment type.  Most of my patters are for me so I went with the latter.

The next step was just following along with the original tutorial. In the tutorial they suggest you cut the folders so you get two-for-one as it were, but I left mine intact in case I have smaller pieces I want to file with the large piece or a project I want to keep together. I  tend to have several projects going at once, (and by that I mean I have bought the notions and patters for them but not started) so I filed the zipper and patters in the hanging folders before draping the fabric over the top. I was able to fit a surprising amount of fabric in each box (the picture below is before the box was full).  You can also iron your fabric before filing it, but I did not because I end up ironing before I cut anyway.

filed fabricI don’t have a ton of fabric right now, so I organized by project type: a box for clothing, a box for quilting, patterns and notions, and a box for costumes and upholstery fabric.  The division worked out perfect. You can fuss and organized depending on the composition of your stash.  The good news is the files are so easy to pull out and move, changing your mind after you start is no big deal!

Now I just have to set up more shelves so I don’t have to stake them 😉

finished filed fabricand voila! filed fabric stash! But beware, this could lead to higher fabric stash capacity and corresponding fabric shopping sprees. Happy sewing!