Mixer Cozy

My kitchen aid lives on the counter (as you may have seen in my second post) and with all the day-to-day cooking going on around it, the mixer often gets dirty between uses forcing me to clean it before every use.  I had the afternoon off and I came up with this awesome cover.

final

A few weeks ago when I was making a pair of short for my hubby’s Muddy Buddy team I found this awesome cupcake fabric on sale so I bought it for the stash knowing it would come in handy soon enough.  I also had left over quilt batting from a baby quit i made a few months back.  Looking up at my awesome filed fabric stash I saw the two and knew exactly what I wanted to do!

What you need:

measurementsCut the three pieces each out of your cover fabric, your lining fabric and your batting. My fabric has a clear direction so I made sure to cut all pieces keeping the cupcakes going top to bottom.

I wanted a little detail on the bottom of mine so I cut my long cover piece at 30×15 instead and then cut two 3.5×15″ yellow pieces and sewed them to the bottom before staring.

Next, you need to add the curve to the tops of your side pieces. I used a turned over 8″ bowl to get matching curves.

round

 

After your pieces are all cut, it is time to quilt them. Layer them so that the lining is wrong side up, then put the batting down and then layer the top fabric right side up – pin together and quilt.  I went with straight lines, but feel free to get creative here.

Once all of your pieces are quilted, pin the sides to the main piece rights sides together around the curve. I like to start in the center and work down to the ends. This way if your cutting was off you will be equally short on both sides and can fix the length at the end. Next sew the side in using a 1/2″ seam allowance. Repeat on the other side.

Next, take your ribbon and hand sew it to the center top in a loop. I used a 1/2″ ribbon, but you could create a loop from extra fabric, or larger ribbon or even leave it out if you don’t want one.

ribbonOnce your pieces are all together, if the bottom is uneven, cut the fabric so that it is straight all the way around.

Then press the bottom in a half inch deep, roll over so the raw edges are hidden, and press again.  Then sew around the bottom to finish.  Another option here is to cut an inch off the bottom and use bias tape to finish.

photo

Other variations could be to add piping around the sides, or add pockets – make it your own and have fun!

 

 

 

 

Advertisements